Advertisement
Step 6:
Assemble the front door (continued)
Turn door over with bracing aligned with holes (make sure the ridges of the door are facing up) and fix the bracing with the provided 3.0 x
10mm rivets through the front of the panel. Then turn door over and insert plastic stoppers at the ends of braces as shown below.
ROOF TOP EDGE
FIX WITH 3.0MM RIVETS
FIXW ITH3 .0*10MMR IVET
WHITE PLASTIC STOPPER
WHITEP LASTIC STOPPER
© Jack Sealey Limited
Note: Fix rivets
through the front panel
with ridges facing up.
Original Language Version
RIDGES FACING UP
RIDGES FACING DOWN
GSS1515.V2, GSS1515G.V2 Issue: 2(I) - 13/04/17
WHITE PLASTIC
WHITEP LASTIC
STOPPER
STOPPER
Advertisement
