Table of Contents
Advertisement
Tighten firmly all the parts of
the standing support.
Standing feet
After
reaching
installation position, lift the
oven up to a working height
for the correct positioning on
the standing support.
R-001 100518
Gas burning pizza brickoven
Once the standing support
has
been
position the structure in the
area where the oven will be
installed.
The red panel shows the
side where the oven's door
will be positioned.
the
Align the standing support's
verticals under the oven's
standing feet with simple
manual operations.
Load
assembled,
inserting the forks as shown
in the figure (see green
rectangles,
oven's standing feet).
DO NOT insert the forks in
the area marked in red in
the figure above.
Lower the oven till it lays
completely on the standing
support's verticals.
the
oven's
body
close
to
the
The
incorrect
positioning of the
forks can severely
damage
the
equipment.
Page 16 of 33
Advertisement
Table of Contents
