English - Velux KLA S105 Manual

ENGLISH

KLA S105
2 m
KUX 110
4 VELUX
®
4-10
KLF 200
Important information
Read instructions carefully before installation. Please keep instructions
for future reference and hand them over to any new user.
Safety
• Disconnect mains supply before installation or removal of the sensor
and before carrying out any maintenance or service work and ensure
that it cannot be reconnected unintentionally.
• If the sensor is activated, the chain actuator automatically closes the
modular skylight. For personal safety, never have your hand or body out
of the modular skylight without disconnecting from mains supply.
Installation
• The sensor must be installed in accordance with current national
legislation.
• The sensor must be positioned approx 2 m above the roof surface, be
exposed to the elements and if possible close to the modular skylight.
• The sensor must be connected to power supply unit KUX 110 and inter-
face KLF 200, please refer to the instructions for these products.
NB: These products are for indoor installation only.
Product
• The sensor has been designed for use with genuine VELUX products.
Connection to other products may cause damage or malfunction.
• The sensor is compatible with products with the io-homecontrol
• The sensor is a low voltage product.
• Do not paint or lacquer the sensor.
• Dirt on the sensor may cause operating problems. Therefore, it is
recommended to clean the sensor with a soft wet cloth once or twice a
year or when required.
• Products marked with the crossed out wheeled bin are regarded as
electrical and electronic equipment and contain hazardous materials,
components and substances. The crossed out wheeled bin symbolises
that electrical and electronic equipment waste must not be disposed
of together with household waste. It must be collected separately at
recycling stations or other collection sites or retrieved directly from
households to increase the possibilities of recycling, reuse and utilisa-
tion of electrical and electronic equipment waste. By sorting electrical
and electronic equipment products with this symbol, you contribute
to reducing the volume of incinerated or buried waste and to reducing
any negative impact on human health and the environment. Further
information can be obtained from the local municipality's technical
administration or from your VELUX sales company.
• The packaging can be disposed of with usual household waste.
• If you have any technical questions, please contact your VELUX sales
company, see telephone list or www.velux.com.
io-homecontrol ® provides advanced and secure radio technology that is easy to install.
io-homecontrol labelled products communicate with each other, improving comfort,
®
security and energy savings.
logo.
®
www.io-homecontrol.com
VELUX 5
®