IFM Electronic Efector 800 VTV122 Operating Instructions

IFM Electronic Efector 800 VTV122 Operating Instructions

Vibration transmitter

Advertisement

Quick Links

Operating instructions
Vibration transmitter
UK
VTV122

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Efector 800 VTV122 and is the answer not in the manual?

Questions and answers

Summary of Contents for IFM Electronic Efector 800 VTV122

  • Page 1 Operating instructions Vibration transmitter VTV122...
  • Page 2 Symbols used ► Instruction Important note Non-compliance can result in malfunctions or interference. 1 Safety instructions • Please read the product description prior to set-up of the unit. Ensure that the product is suitable for your application without any restrictions. • The unit conforms to the relevant regulations and EC directives.
  • Page 3 ► Select either the ¼“-28 UNF / M8 (2) or the ¼“-28 UNF (3) threaded adapter and insert into the unit (1). Both adapters are supplied. ► Tighten using a 3 mm Allen key. Tightening torque 8 Nm. ► Drill and tap a hole at the mounting location: - M8 hole / depth min.
  • Page 4 5 Scale drawing M12 x1 1/4''-28 UNF 1: threaded adapter ¼“-28 UNF / M8 2: threaded adapter ¼“-28 UNF tightening torque 8 Nm 6 Maintenance, repair, disposal The operation of the unit is maintenance-free. It is not possible to repair the unit. After use dispose of the unit in an environmentally friendly way in accordance with the applicable national regulations.
  • Page 5 Compact diagnosis system shall be connected only by R/C (CYJV2) cord type ADOxH04xxxxxxxxx04 or VDOxH04xxxxxxxxx04STxx040xxx, manufactured by ifm electronic, rated min. 32 V, 80 °C, available upon request from ifm electronic or use any alternate R/C (CYJV2) cord, having the same or better ratings, suitable for field wiring.

Table of Contents