Nice EDSB Instructions And Warnings For Installation And Use page 5

TABLE 2 - "L2" LED signals concerning the BM
memory
"L2" LED flashes
1 flash (red)
2 flashes (red)
3 flashes (red)
4 flashes (red)
5 flashes (red)
5 slow flashes (red)
TABLE 3 - Buzzes emitted during programming
Buzzes Meaning
1 buzz Signals normal pressing of a key.
2 buzzes in close
Signals the entering of an invalid
succession + 1
combination.
tone
Signals the end and successful out-
3 buzzes
come of a programming procedure.
After entering the password incor-
1 buzz at regular
rectly for 3 times, it signals that the
intervals
keypad remains locked for 1 minute.
Signals that an error was committed
Series of buzzes
and that the procedure failed.
Meaning
BM60
BM250
BM1000
Indicates that invalid codes are
stored
Error during memory reading
Memory empty
password, or else you will have to erase the entire
memory and restart the programming sequence from
the beginning. In the "Professional" mode it is possible to
run other functions, described in Chapter 8.
The two types of programming modes, "Easy" and
l
"Professional", are alternative to one another: in other
words, it is necessary to select one of the two before starting
the programming phase, namely when the device's memory
is still empty. Subsequently, the programming mode can be
changed (from "Easy" to "Professional" or vice-versa) by first
erasing the entire memory of the device.
6 - PROCEDURES FOR PROGRAMMING
THE DEVICE IN THE "EASY" MODE
6.1 (Easy) Programming ONE combination to
be paired with the  and  buttons (this procedure
is alternative to the one described in Paragraph 6.2).
I1I I2I
Press button "T". Enter the desired combination within
30 seconds (minimum 1, maximum 9 digits).
button once and the  button once. If the procedure was
performed correctly, the keypad emits 3 buzzes.
6.2 (Easy) Programming TWO different combi-
nations: one to be paired with the  button and an-
other to be paired with the  button (this procedure
is alternative to the one described in Paragraph 6.1).
I1I I2I Enter within 30 seconds the FIRST
Press button "T".
I3I Press the 
English – 4