Orbit Research Orbit Reader 20 Plus User Manual page 71

Orbit Reader 20 Plus – User guide
10. Activate the Upgrade button.
11. The utility starts upgrading the device.
12. Do not unplug the cable. Wait for the message "Device upgrade has been
completed" on the upgrade utility or until the Orbit Reader 20 Plus reboots
and shuts down.
13. The Orbit Reader 20 Plus is upgraded. Turn on the Orbit Reader 20 Plus
to start using the device.
To check for a successful upgrade of the Orbit Reader 20 Plus, press Select
+ Up Arrow to open the Orbit Reader 20 Plus Menu and arrow to "Ver" in the
list. The version number of the firmware release should match the number
shown in the upgrade utility.
Orbit Research Confidential and Proprietary Information
Version 1.0
71