Orbit Research Orbit Reader 20 Plus User Manual page 70

Orbit Reader 20 Plus – User guide
4. Press and hold down the Right Panning forward button + Dot 5, then press
Dot 8. The utility shows the message "Orbit Reader 20 Plus is connected"
in the Device status field. It shows the message "Do you want to upgrade
the device?" in the message field at the bottom of the dialog.
5. Release Dot 8 first, then release the Right Panning key and Dot 5. This
switches the Orbit reader 20 Plus to Upgrade mode. You should hear a
tone on your PC.
6. The utility shows the device serial number and the software version of the
device at the top right corner of the window. If the serial number is blank,
repeat steps 4 and 5.
7. Activate the Browse button found in the dialog.
8. Browse and select the firmware bin file from your PC. The file is in the
folder you unzipped previously.
9. Once the file is selected, the dialog shows the software version of the
selected file.
Orbit Research Confidential and Proprietary Information
Version 1.0
70