Ver; Bver; Reset Defaults; Clock Settings - Orbit Research Orbit Reader 20 Plus User Manual

Orbit Reader 20 Plus – User guide
For example, if you wish to have the system language as English Grade 2 and
work with BRF files, you can select Profile 3 that has the following default
settings.
System Language: Computer Braille
-
Read/Edit Language: BRF
-
Editor Encoding: ANSI
-
You can change the system language to English Grade 2 and you can have the
desired changes. Likewise, all the profiles can be configured as per the
requirements.
Please refer to the

Ver.

The Version in the menu displays the version of the software running on your
device. You may need the version number when talking to Customer Service. For
the latest version update, see the website
Note: The software version will be shown on the computer braille only.

BVer.

The Bver menu item displays the version of the bootloader software installed on
your device. You may need the bootloader version number when talking to
Customer Service.
Note: The software version will be shown on the computer braille only.
Sr.
The Serial Number in the menu shows the individualized serial number of the
device you are using. This number may be important for warranty purposes.

Reset Defaults

The Reset Defaults in the menu resets all your menu settings to the factory
settings. To reset to the default settings, press the Select button or Dot 8 . This
action resets defaults and takes you to the top of the Menu options list (Battery
Status).

Clock Settings

The Orbit Reader 20 Plus has a clock in it. You can check the date and time by
pressing Space + Dots 2 3 4 5. It also time-stamps files when they are created or
edited. Please note, the command (Space + t) for checking the time is applicable
in file manager and reader mode.
Orbit Research
localization section in this guide for additional information.
Confidential and Proprietary Information
Version 1.0
23