Media Device; Buffering Text Input To Remote Devices - Orbit Research Orbit Reader 20 Plus User Manual

Orbit Reader 20 Plus – User guide
3. On the Orbit Reader 20 Plus, press Space + Dots 3 7. "-- Serial USB" is
displayed.
4. Install any necessary drivers. See the Orbit Reader 20 Plus Resources
page or screen reader manufacturer's support webpages.
5. Configure the screen reader. Refer screen reader section in this document
or refer to your screen reader documents.
Mass Storage
To use an SD card inserted in the Orbit Reader 20 Plus as a drive on your
computer, follow these steps:
1. Turn on the Orbit Reader 20 Plus. It responds with braille from your last
activity.
2. Connect the Orbit Reader 20 Plus and your computer using USB cable. "--
Charger connected" is displayed.
3. On the Orbit Reader 20 Plus, press Space + Dots 5 7. "-- Mass Storage
mode" is displayed. Depending on your settings, the computer also
responds with a notification of a new drive that is now available.
4. Use your PC to read and write files on the new drive.
To switch back to Stand-Alone mode, press Select + Left Arrow. Do not switch
back to Stand-Alone mode while file transfers are in progress.
Note: If you have hidden files enabled on your device, you may encounter the
following files:
•
.BKP-FILEHISTORY -
of the last 100 files that were opened on the device.
• .BKP-RECENTHISTORY - This file contains information required for
software to generate the recent file list.
• .Logfile - Log file containing software debug information.
Do not delete these files. You will only see them if you have hidden files
enabled.

17.5 Buffering Text Input to Remote Devices

If you are typing fast on a braille display, there will be times when remote device
lags behind, slowing down your ability to input text quickly. The Orbit Reader 20
Plus has a Buffer mode that allows you to input text up to 255 characters and
send them faster to a remote device, avoiding problems with the speed of input
of translated braille.
Note: Buffering text works only when connected with Bluetooth.
To open an input field in the Buffer mode, press' Select + Down Arrow'. Once
open, a cursor indicates that you can start entering text. Press Dot 8 to send the
Orbit Research
This file contains information of the last read position
Confidential and Proprietary Information
Version 1.0
46