Advertisement
Quick Links
Advertisement
Related Manuals for JNJ SPAS SPA-319
Summary of Contents for JNJ SPAS SPA-319
- Page 1 HOT TUB Model SPA-319 OPERATING INSTRUCTION...
- Page 2 Ⅰ. Overview of the Panels Fig . 1: The sketch map for the control panel with radio function(B2=OFF) Fig.2 ： Control Panel “ ”Radio frequency up/minute “ ”System power ON/OFF adjustment confirmation keypad “ ” Radio frequency up/hour “ ” Radio or DVD/TV Switch and ON/OFF adjustment “...
- Page 3 shif “ ” Radio volume down “ ” LED light ON/OFF “ ” Radio channel memory/keypad lock “ ” Surfing pump 1 ON/OFF “ ” Radio channel searching/setting “ ” Surfing pump 2 ON/OFF shif “ ” Long circulation cleaning ON/OFF “...
-
Page 4: Anti-Freezing Function
temperature, if the temperature sensor is open or short, it will display “E1” (Fig. 4). The “---” means that system is under standby status, the preheating and circulation cleaning is not working and closed. 1.2 Under standby status, press“ ” key to go into turning on status. 1.3 Under turning on status, press “... - Page 5 Ⅳ. The operation under standby status 1. Clock setting 1.1 When preheating and circulation cleaning are not turned on, press “ ” or “ ” to enter ∶ the clocking setting, the “ ” is not fashing at this time, but hour and minute are fashing. 1.2 Each press “...
-
Page 6: Preheating Setting
3. Preheating setting The preheating could be set up once in a day. The details shown below: 1) When A1=OFF, the preheating can’t be set up(Fig. 9), when A1=ON, the preheating could be set up, LCD is showing “ON” at this time(Fig. 10). 2) Press “... -
Page 7: Time Setting
time setting time setting 4. The switch between Celsius and Fahrenheit 4.1 When A4=OFF, the system could be only display temperature in Celsius 4.2 When A4=ON, the temperature display will be controlled by the key “ ”, the user could switch the temperature display between Celsius and Fahrenheit. - Page 8 minutes; When B3=ON, the max working time of blower is 20 minutes. 5. The operation of radio and CD 5.1 Press “ ” key to turn on or turn off the radio and CD. 1st time to press the “ ”...
- Page 9 level probe. A7 ： OFF： With water fow sensor, if it detected no water fow, the heater will not work. ON ： Without water fow sensor, could be equipped with any other manufacturer’s heater. A8 ： OFF： With Ethink control panel. ON：...
- Page 10 Ⅷ.Electrical Parameters 1、 ： Performance index Rated voltage：220-380VAC/50Hz Maximum working current：60 A/220V－240V～ Voltage-resistance：1250V/1 minute without penetration。 Isolative resistance：》10MΩ Water resistance grade：IPX5 Electric shock resistance：first grade (2) Output loading index Heater：220-240VAC/3KW x 1. Water pump： 220-240VAC/1.5KW×3 Water pump： 220-240VAC/0.25KW×1 Air pump ： 220-240VAC/700W×1 Spa light：...
- Page 11 Fig. 14: The placement of control box Heater Line1 Heater Line Heater Line2 Empty Neutral1 Neutral Neutral2 Protective Earth Protective Earth Fig. 15: Wire connection Fig. 16: Wire connection for for H380 heater H220 heater PUMP1 High Speed Line PUMP1 Low Speed Empty Neutral Neutral...
- Page 12 **************************************Note**************************************** The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction. Children being supervised not to play with the appliance. ...
Need help?
Do you have a question about the SPA-319 and is the answer not in the manual?
Questions and answers