Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for JNJ SPAS SPA-8098
Summary of Contents for JNJ SPAS SPA-8098
- Page 1 HOT TUB Model SPA-8098 OPERATING INSTRUCTION...
-
Page 2: Function Summary
I、 Illustration to buttons Fig.1： Control Panel “ ” “ ” On-off/Setting confirm Frequency up- searching / Minute HOUR “ ” “ ” Frequency down- searching/ Hour Radio or CD Switch/ On-off “ ” “ ” Volume up/ Set switch view pump “... -
Page 3: Operation
7、24 hours display and set time 8、 Menoery preserve once power off 9、Fahrenheit & Celsius degree switch 10、Antifreezing functions 11、 Keys with backlight 12、Lock settingl 13、Three-phase or single-phase, available of 110-120VAC or 220-240VAC 14、Choice with offering a AC for circumscribing DVD or TV 15、Choice with power control 、Choice with galvanoscope device III、... - Page 4 4、Set pre- circulation-cleaning： In the pre-set mode circulation will be automatic once per day. The display will show clearly whether ： circulation is in action or not. See following Fig 5-6 Fig.5： Circulation-cleaning off Fig.6： Circulation-cleaning on When setting the Circulation-cleaning the display must be in the “Power off” status and the LCD display “---” 、...
- Page 5 1） circulation 2） Set start of circulation 3） Set lasting time for circulation 4） Finished 3)、 Press “ ” to set the circulation times; it will show the minimum(5 minutes) on the LCD and this time will not flash. It will add 5 minutes by pressing “ ”...
-
Page 6: Preset Temperature
图 8： Pre-heat Off Fig.7： Pre-heat On Pre-heating is set when the spa is in the “Power off” status and the LCD display shows “---” 1） Set preheating Time setting for Preheating 2） Continual time of preheating 3） Preset temperature 4）... - Page 7 time HOUR 2)、 It will add 1 hour when pressing “ ” each time and hours could be added continually when pressing HOUR the “ ” without stopping. The adjustment of hours is 0-23 It will add 1 minute when pressing “ ”...
-
Page 8: Temperature Setting
working。 When the HEATER is “I” type frame，The power of circulation PUMP must reach 750W。Otherwise the heater won’t work due to not enough water pressure to drive pressure switch. Conditions meet the above “2” ， and the HEATER is still not working， Please iii. - Page 9 Ⅱ、 LCD will show present frequency and volume of the radio after turning on the radio。 Ⅲ、 In the working of radio， The volumle of the present radio frequency can be changed by pressing HOUR “ ”and “ ” Ⅳ、 Pressing the key “ ”...
- Page 10 4） 、 In the case of an error the LCD shows ”E1”. If this happens, the thermostatic heating sytem will NOT be available, the heater doesn’t work. ： 15、 Operating the Air Blower “ ” Press controls the blower ： 16、...
- Page 11 i. Disposal of water j. Precautions to avoid damage due to water freezing Precautions to avoid damage when the appliance is left empty for extended period. 2.2 Sub-clause 7 The installation instruction shall state the substance of the following: - Earthed appliances must be permanently connected to fixed wiring; - The appliance should be supplied through a residual current device (RCD) having a rated residual operating current not exceeding 30 mA.
- Page 12 Solutions of Fault Phenomenon Reason How to Solve the problem 1. The electric leakage switch was 1. Check and eliminate the malfunction, breaked off restart the spa No power supply 2. The Fuse be break off 2. Please change fuse 1.
Need help?
Do you have a question about the SPA-8098 and is the answer not in the manual?
Questions and answers