Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for JNJ SPAS SPA-8028
Summary of Contents for JNJ SPAS SPA-8028
- Page 1 Outdoor spa SPA—8028 PROGRAMMING INSTRUCTIONS...
-
Page 2: Programming Instructions
PROGRAMMING INSTRUCTIONS 1. Illustration to buttons TEMP HEAT OZONE LOCKED VOL+ OZONE OPEN PUMP2 LIGHT BLOWER PUMP1 PUMP2 PUMP3 HOUR HEAT CLOSE PUMP3 ON/OFF Fig﹒1：Sketch map of big massage bathtub ON/OFF “ ” “ ” Frequency up- searching / Minute On/ Off RADIO HOUR... - Page 3 2. Function Summary (1) Constant temperature，preset heater，and display and operation of water temperature。 (2) Display and set of 12 hours am/ pm model。 (3) Circulation cleaning。 (4) CD frequency input。Display of radio frequency and storage for 10 channels。 (5) Display and 87 grades adjustment of volume。 (6) Infrared remote control。...
- Page 4 ” ， It will add 1 minute when pressing “ In the s tatus of time setting each time，and the minutes ” could be added continually when pressing the“ without stop。the minute adjustment range of the minute is：0~59。 The system will quit the time-setting status automatically after 6 seconds without pressing。 (4) Operation to circulation-cleaning settings：...
- Page 5 PUMP3 1） OPEN time setting of Circulation-cleaning 2） HOUR VOL+ Continual time of Circulation-cleaning 3） VOL+ OZONE Turn on or off OZONE synchronization? 4） PUMP3 5） Press “ ”again and the setting will be finished VOL+ 3） 、Press“ ” to continual time setting of Circulation-cleaning， it will show the minimum continue time is 1 minutes on the LCD，...
- Page 6 Fig﹒7：Pre-heat On Fig﹒8：Pre-heat Off HEAT 1） OPEN 2） time setting of Pre-heating HOUR VOL+ continual time setting of pre-heating 3） HOUR VOL+ TEMP temperature setting of pre-heating 4） HEAT ”again 5） Press“ and the setting will be finished Pre-heating setting is in the “Power off” status and the LCD display “---” 。 HEAT ”...
- Page 7 HOUR ” pressing the “ without stop。The adjustment range is AM 0~PM 11 。 And after time setting of pre-heating, you could go on to next step。 VOL+ 3、 Press “ ”to continual time setting of pre-heating， it will show the minimum continue time is 10 minutes on the LCD，...
- Page 8 ON/OFF by system or by pressing “ ” key intentionally。 (8) Operation to Power ON/ OFF 。 At the same time， the LCD will show Pressing the key will enter from O FF O FF whether the power is on or off。 Fig﹒9：...
- Page 9 is 10，Name of channel is 0-9。 VOL+ OPEN Ⅵ） 、The volume can be changed by pressing key “ ”&“ ” 。 (11)Operation to Pump : KEY of “Pump1” are control surf pump1 & surf pump2 , Key of “Pump2” are for water Column & waterfall pump(water Column light is working synchronization).
- Page 10 (1) Performance index： Rated voltage： 220VAC/50Hz（110VAC/60Hz） Maximum working current： 60A（100A/110V） Isolative resistance ：>=200MΩ Voltage-resistance： 1250V/1 minute without penetration。 Water resistance grade： IPX5。 Electric shock resistance： first grade (2) Output loading index Heater： AC220V/3KW x 1 Surf Water pump： AC220V/2 HP x 3 water pump：...
- Page 13 5.Layout of setting 220VAC SPK-L PUMP11 SPK-R HEAT PUMP12 WATER COLUMN LIGHT OZONE HEAT PUMP2 DVD/TV BLOWER PUMP3L PUMP3 LIGHT SENSOR/LEAD-IN POWER INPUT 100A switch Creepage protector...
Need help?
Do you have a question about the SPA-8028 and is the answer not in the manual?
Questions and answers