Lubrication - Toro Groundsmaster 360 Series Operator's Manual

Lubrication

Service Interval: Every 50 hours
The machine has grease fittings that must be
lubricated regularly with #2 general-purpose,
lithium-based grease. If the machine is operated
under normal conditions, lubricate all bearings
and bushings after every 50 hours of operation or
immediately after every washing.
Lubricate the following areas:
•
Caster fork shaft bushings (4)
Figure 13
•
Deck links (5) (Figure
Figure 14
•
Idler arm pivots (4)
(Figure 13)
14)
(Figure 15)
•
Wing deck hinges (10)
g011557
•
Folding caster arm pivot (1)
g025655
•
PTO drive shaft (2)
16
Figure 15
(Figure 16)
Figure 16
(Figure 17)
Figure 17
(Figure 18)
g025838
g025654
g025656