Sip; Sip Server Configuration - ATCOM AG-110 User Manual

AG-110 SIP Gateway User Manual
2.3

SIP

2.3.1

SIP server Configuration

1. Primary Server:
2. Secondary Server:
3. Address:
4. Port:
5. Domain Name:
6. Send Registration Request with Expire Time： Register TTL (unit: seconds).
Indicate the register period, if AG-110 always log off after some time，please
set this time to a lower value.
7. Outbound Proxy IP: Outbound Proxy server IP address
8. Outbound Proxy Port: Outbound Proxy server port
RTP port Number Setting: RTP local port, the minimum value is 4
NAT Traversal
1. NONE:
2. UPnP:
3. Stun Server IP:
4. Stun Server Port:
Gateway Settings
1. Dial Plan:
2. # use as a quick dial function: the number will send immediately after you
press the # button
Primary Server,
Secondary server if primary server is unavailable.
secondary server (back up function)
SIP server IP address
SIP server port，the well know port is 5060
server domain
disable NAT traversal
use UPnP，need the support of upper gateway
Fill in your stun server IP when using stun method
Fill in stun server port
please refer to dial_plan
AG-110 will auto switch to
Page 11 of 37