4．Faq; Q1 What Is The Default Account Of Ag-110; Q2 How To Use The Ivr Function Of Ag-110 - ATCOM AG-110 User Manual

AG-110 SIP Gateway User Manual
4． FAQ
Q1 What is the default account of AG-110?
A1： The default account is:
Administrator: user name: admin
User:
Q2 How to use the IVR function of AG-110?
A2：
The IVR function is record in G729 codec, so you have to choose G729 codec to
active the IVR.
You can use IVR function to observe and set the WAN port network parameters
pick up the handset and dial **** to enter IVR mode。
Key Function
**** nter main menu
100# eck network state
110# DHCP Settings
120# Static IP address
Settings
130# Gateway IP settings Use "*" replace ".", and "#" as end.
140# Subnet mask settings Use "*" replace ".", and "#" as end.
user name: user
Submenu
1# Enable DHCP function
2# Disable DHCP function
or# back to main menu
Use "*" replace ".", and "#" as end.
For example: 172*16*230*227#
or # back to main menu
For example: 172*16*230*1#
or # back to main menu
For example: 255*255*255*255#
or # back to main menu
password: voip;
password: voip
Input
29