Q7 How To Configure Ag-110; Q8 How To Change Ag-110 Lan Port Mac Address - ATCOM AG-110 User Manual

one answers the call in the timeout.
Call Forwarding: (forwarding always)
a) Enable call forwarding: pick up the handset press *72#
will hear the dial tone press the forwarding number then you will here
three beeps indicating setting finish, then all incoming call will forward to
this number automatically。
b) Disable call forwarding: pick up the handset
will here three beeps indicating setting finish
Do not disturb: (DND)
a) Enable DND:
three beeps indicating setting finish then the phone won't ringing when
there is an incoming call。
b) Disable DND:
three beeps indicating setting finish
Call transfer:
a) Unattended transfer:
number then B will hear three beeps indicating the transfer
successfully。
b) Attended transfer： A calls B B push the hook flash to hold A B then
dial C number to talk with C
call then A can talk with C。
Call Return:
Pick up the handset
3 way conference call:
A calls and talks with B
number to talk with C
way conference call
Q7 How to configure AG-110?
A7 please refer to "AG-110 quick start guide"
Q8 How to change AG-110 LAN port MAC address?
A8 please access http://AG-110ip/burn.htm and change the MAC address,
AG-468 SIP 协议网关使用手册
pick up the handset
pick up the handset
A call B B press *98# and then enter C
and then press *69# to dial the latest received call
B push the hook flash to hold A B then dial C
B then push the hook flash again to enable three
C will leave the call is B push the hook-flash again.
press #72#
press *74# then you will here
press #74# then you will here
then B press *98# to transfer the
then you
then you
33