System Settings Screen - Velodyne SMS -1 User Manual

By navigating the cursor to the NEXT field and pressing SELECT, the following screen appears:
Figure 5: SYSTEM SETTINGS Screen
From this screen the crossover, subsonic filter, phase, polarity, volume, and other settings can
be set, as well as specifics for each preset, if desired.
Your SMS-1 comes with 6 presets, four of which are preprogrammed at the factory. The Setup
setting is used to initially set the crossovers, slopes, phase, polarity, and volume for all presets.
Then, each preset can be individually adjusted if desired. The presets are as follows (they are
also labeled on the remote):
1. Action/Adventure
2. Movies
3. Pop/Rock
4. Jazz/Classical
5. Custom (off from the factory, or flat)
6. EQ Defeat
.
w w w . v e l o d y n e . c o m
Digital Drive User's Manual
15