Icom IC-SAT100M Operating Manual page 17
Hide thumbs
Also See for IC-SAT100M:
- Basic manual (63 pages) ,
- Network setting manual (10 pages) ,
- Operating manual (30 pages)
Table of Contents
Advertisement
5
CONNECTING AND MAINTENANCE
Connect the antenna unit and the LAN cable
Connect the main unit and the supplied LAN cable as describe below.
You can also connect a user supplied LAN cable up to 100 m.
1. Remove the cover attached to the LAN cable.
2. Insert it into the antenna cable.
LAN cable with
antenna unit
3. Attach the cover attached to the LAN cable as
shown.
Information
When the transceiver is connected to network devices, change the static IP address.
Before using the transceiver, enter a static IP address for the antenna unit and the main unit.
Ask your dealer for details.
Default
IP address:
192.168.0.1(Main Unit )
192.168.0.2(Antenna Unit)
Subnet Mask:
255.255.255.0
Default Gateway:
192.168.0.254
Supplied LAN cable
4. Connect to the gray LAN cable with the main unit.
Supplied
LAN cable
After connecting the Antenna cable and the LAN
cable, wrap the connectors with rubber vulcanizing
14
of
Gray LAN cable
the main unit
Advertisement
Table of Contents
Need help?
Do you have a question about the IC-SAT100M and is the answer not in the manual?
Questions and answers