Table of Contents
Advertisement
4
MENU SCREEN
Menu items
Display
Backlight
Select a Backlight setting.
• OFF:
The backlight is always OFF.
• ON:
The backlight is always ON.
• Auto (Key):
When any switch except [PTT] is pushed,
the backlight lights for 5 seconds.
• Auto (Dim):
The backlight automatically becomes dark
when the D-sub 25 pin function is active.
• Dim:
The backlight is darker than
Contrast
Adjust the contrast level.
Language
Select a Language for the user interface.
Beep
Sets the transceiver's beep level.
TIP: When you set the beep level to between
"1 (Linked)" and "5 (Linked)," you can adjust the
beep level within the range of 0 and selected level by
rotating [VOL].
System Beep Lv
Sets the system beep output level.
The beep sounds when connecting to or blocked from
the system.
Emer Beep Lv
Sets the beep output level when in the Emergency
mode.
Key Beep Lv
Sets the key beep output level.
Ringer Lv
Sets the ringer output level.
Opening Beep Lv
Sets the opening beep output level.
The transceiver beeps when it is turned ON.
Information
Battery Info
Displays the battery voltage.
RSSI
Displays the Received Signal Strength Indication
(RSSI).
"
My Position
Displays your current position.
Firmware Info
Satellite Info
Displays satellite information.
transceiver.
9
Advertisement
Table of Contents
