SUN2000-(2KTL-6KTL)-L1
User Manual
9.1 Removing a SUN2000
Procedure
Step 1 Power off the SUN2000. For details, see
Step 2 Disconnect all cables from the SUN2000, including signal cables, DC input power
cables, battery cables, AC output power cables, and PE cables.
Step 3 Remove the WLAN antenna or the Smart Dongle from the SUN2000.
Step 4 Remove the SUN2000 from the mounting bracket.
Step 5 Remove the mounting bracket.
----End
9.2 Packing a SUN2000
●
●
9.3 Disposing a SUN2000
If the SUN2000 service life expires, dispose the SUN2000 according to the local
disposal rules for electrical equipment and electronic component waste.
Issue 03 (2020-07-20)
If the original packaging is available, put the SUN2000 inside it and then seal
it using adhesive tape.
If the original packaging is unavailable, put the SUN2000 inside a suitable
hard carton and seal it properly.
Copyright © Huawei Technologies Co., Ltd.
9
SUN2000 Disposal
8.1 System
Power-Off.
9 SUN2000 Disposal
93