Huawei SUN2000-2KTL-L1 User Manual page 72

SUN2000-(2KTL-6KTL)-L1
User Manual
Figure 7-7 Physical layout design of PV modules
----End
Scenario 2: Setting on the Solar Inverter Side (Solar Inverter Not Connected
to the Management System)
Step 1 Access the
physical layout of Smart PV Optimizers.
1.
2.
Issue 03 (2020-07-20)
Device Commissioning
Log in to the FusionSolar app. On the Device Commissioning screen, choose
Maintenance > Physical layout design of PV modules. The Physical layout
design of PV modules screen is displayed.
Tap the blank area. The Identify image and Add PV modules buttons are
displayed. You can use either of the following methods to perform operations
as prompted:
– Method 1: Tap Identify image and upload the physical layout template
photo to complete the optimizer layout. (The optimizers that fail to be
identified need to be manually bound.)
– Method 2: Tap Add PV modules to manually add PV modules and bind
the optimizers to the PV modules.
Copyright © Huawei Technologies Co., Ltd.
screen on the FusionSolar app to set the
7 Man-Machine Interaction
66