Panasonic KX-UDS124 Manual page 4

1. Please select Add new Device on the administration portal under Elements/Devices.
2. Please select the DECT KX-UDS124 under Panasonic.
3. A new window appears, here you can select your firmware version.
4. Enter the MAC address. You can find the MAC address either on the delivery box or on the
back side of the device (see example).
5. Save your entries.
6. Connect the DECT base to your LAN network.
The base station will now be synchronised. This can take a while and depends of the
firmware download time.
LED indications:
Status
OFF
Green ON
Description
Off/SIP-CS Software downloading
Stand-by (no active calls)
4