Initial Operation; Installation - Panasonic KX-UDS124 Manual

B. Initial operation
1. Requirements
In order to use this IP telephone with your telephone system you will need a sound
broadband connection.
In order to ensure a successful operation of the devices, site serving and installation via a
certified Panasonic partner is a mandatory pre-condition, otherwise NFON cannot
provide any technical support.
The DECT base is not yet added as a device in the administration portal. The master-CS
(base) has to be added manually before putting into service. Please note all necessary
steps on the following pages.

2. Installation

2.1. Overview
Overview
Before you begin using your new Panasonic DECT system, we would like to provide you with a brief
overview of the steps required for installation.
1. Add DECT base (KX-UDS124) on the administration portal.
2. Add DECT mobile handsets (KX-UDT1x1) on the administration portal.
3. Add a phone extension for the DECT mobile handsets on the administration portal and assign
the respective enddevice.
4. Register mobile handsets to base.
5. The following pages provide a detailed description of the individual steps.
2.2. Adding the DECT base KX-UDS124
2.2.1. Overview Multicell KX-UDS124 installation
Overview Multicell KX-UDS124 installation
The Panasonic Multicell KX-UDS124 enables a multitude of connection possibilities.
You can configure only one Air Sync Group via autoprovisioning.
The maximum number of mobil devices is 255.
2