Download Print this page

Pan Acoustics TWM III Operation Manual page 5

For pb 04, pb 08, pb 16, pb 24, pb 32, pb 40, p 04-pi, p 08-pi, p 16-pi

Hide thumbs Also See for TWM III:

Assembly Manual

Depending upon the speaker, additional brackets may be required, see table.

Number of brackets depending upon speaker module

Model

P 04

PB 04

Brackets

4.2. Assembly

Improperly selected fastening material for wall or ceiling assembly may cause the speaker to fall

down.

Prior to assembly, it is necessary to check the wall or ceiling material to which the speaker is to be

fastened. Be sure to provide suitable fastening material (dowels and matching screws) for assembly.

Insert the slot nut (A) into the

rear slot of the speaker through

the opening in the cover.

P 08-Pi

PB 08

Pre-mount the 2 set screws (B)

into the middle threads of the

slot nuts. Position the slot nut

at the midpoint of the speaker

and tighten the set screws so

that the slot nut can no longer

move.

P 16-Pi

PB 24

PB 16

V 1.0

PB 32

PB 40

Screw bracket (speaker) (C)

onto the mounted slot nut (A)

using 2 screws (D).

TWM III

Page 5 of 7