Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Pan Acoustics Manuals
  4. Racks & Stands
  5. TWM II
  6. Operating manual/assembly manual

Pan Acoustics TWM II Operating Manual/Assembly Manual

For pb 04, pb 08, pb 16, p 02-pi, p 04-pi, p 08-pi, p 16-pi
Hide thumbs
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual
DOCUMENTATION
OPERATING MANUAL / ASSEMBLY MANUAL
TWM II Wall Mount
for PB 04 | PB 08 | PB 16 | P 02-Pi | P 04-Pi | P 08-Pi | P 16-Pi
Read the operating manual carefully prior to putting the device into operation.
The operating manual must be kept near the device.
Pan Acoustics GmbH │ Lindener Str. 15 │ 38300 Wolfenbüttel │ Germany │ Tel.: +49 (0) 5331 900 95 70 │ Email: contact@pan-acoustics.de
V 1.0
www.pan-acoustics.de

Advertisement

loading

Related Manuals for Pan Acoustics TWM II

Summary of Contents for Pan Acoustics TWM II

  • Page 1 Read the operating manual carefully prior to putting the device into operation. The operating manual must be kept near the device. www.pan-acoustics.de Pan Acoustics GmbH │ Lindener Str. 15 │ 38300 Wolfenbüttel │ Germany │ Tel.: +49 (0) 5331 900 95 70 │ Email: contact@pan-acoustics.de...

  • Page 2: Product Description

    2. Product description With the TWM II Wall Mount, a PB 04 | PB 08 | PB 16 and P 02-Pi | P 04-Pi | P-08-Pi | 16-Pi speaker can be easily and safely mounted on walls. The mount is attached to the wall by means of dowel joints (not included in scope of delivery).

  • Page 3: Safety Instructions

    • Only the original parts delivered by Pan Acoustics are allowed to be used for assembly. The use of other parts, in particular parts from unknown or third-party manufacturers, is prohibited.
  • Page 4 Assembly Manual Speaker Mount TWM II • The TWM II wall mount is rated for the assembly of speaker systems weighing up to 11 kg. • It is recommended to use an additional securing element to secure each suspended speaker against falling.
  • Page 5 Assembly Manual Speaker Mount TWM II Fasten swivel bracket (A) Attach fastening bracket (C) Attach fastening bracket (C) with 2 set screws (B) (position above the speaker) (position below the speaker) in the rear slot. to the wall using two suitable to the wall using two suitable screws.
  • Page 6 Assembly Manual Speaker Mount TWM II 6. Maintenance and care The speaker accessory may show signs of wear over time, e.g. due to mechanical loads, corrosion or improper handling. Therefore, for permanent installations, check the mount at regular intervals for signs of wear and firm fit.