Download Print this page

Pan Acoustics TWM III Operation Manual

For pb 04, pb 08, pb 16, pb 24, pb 32, pb 40, p 04-pi, p 08-pi, p 16-pi
Hide thumbs Also See for TWM III:

Advertisement

Quick Links

DOCUMENTATION
OPERATING MANUAL / ASSEMBLY MANUAL
Wall Mount TWM III
for PB 04 | PB 08 | PB 16 | PB 24 | PB 32 | PB 40 | P 04-Pi | P 08-Pi | P 16-Pi
Read the operating manual carefully prior to putting the device into operation.
The operating manual must be kept near the device.
Pan Acoustics GmbH │ Lindener Str. 15 │ 38300 Wolfenbüttel │ Germany │ Tel.: +49 (0) 5331 900 95 70 │ Email: contact@pan-acoustics.de
V 1.0
www.pan-acoustics.de

Advertisement

loading

Summary of Contents for Pan Acoustics TWM III

  • Page 1 Read the operating manual carefully prior to putting the device into operation. The operating manual must be kept near the device. www.pan-acoustics.de Pan Acoustics GmbH │ Lindener Str. 15 │ 38300 Wolfenbüttel │ Germany │ Tel.: +49 (0) 5331 900 95 70 │ Email: contact@pan-acoustics.de...
  • Page 2 2. Product description With the TWM III speaker accessory, a PB 04 | PB 08 | PB 16 | PB 24 | PB 32 | PB 40 and P 02-Pi | P 04-Pi | P 08-Pi | P 16-Pi array can be easily and safely mounted on walls. The mount is attached to the wall by means of dowel joints (not included in scope of delivery).
  • Page 3: Safety Instructions

    • Only the original parts delivered by Pan Acoustics are allowed to be used for assembly. The use of other parts, in particular parts from unknown or third-party manufacturers, is prohibited.
  • Page 4 Pan Beam and Pan Speaker series. • The TWM III is rated for the assembly of speaker systems weighing up to 11 kg. • It is recommended to use an additional securing element to secure each suspended speaker against falling.
  • Page 5 Position the slot nut using 2 screws (D). at the midpoint of the speaker and tighten the set screws so that the slot nut can no longer move. © Pan Acoustics GmbH V 1.0 Page 5 of 7...
  • Page 6 If the check reveals uncertainties or damaged parts, the speaker/mount may no longer be used. The operator/user is required to be familiar with country-specifi c comprehensive testing regulations and to apply them. © Pan Acoustics GmbH V 1.0 Page 6 of 7...
  • Page 7 Please undertake to ensure that the product cannot be re-used or used for any other purpose after disposal. 9. Contact address Pan Acoustics GmbH Tel: +49 (0) 5331 900 95 70 Lindener Straße 15 Fax: +49 (0) 5331 900 95 79 Email: support@pan-acoustics.de 38300 Wolfenbüttel Germany © Pan Acoustics GmbH V 1.0 Page 7 of 7...