Advertisement
Assembly Manual
•
The user is to observe existing safety requirements and regulations.
•
The speaker accessory is not to be used for lifting, lowering or securing people or objects other
than the specifi ed speakers from the Pan Beam and Pan Speaker series.
•
The TWM III is rated for the assembly of speaker systems weighing up to 11 kg.
•
It is recommended to use an additional securing element to secure each suspended speaker
against falling.
•
In general, a visual inspection of the speaker and the accessory is to be performed prior to
each use/assembly. If there are signs of wear, cracking or deformation, they are to be replaced
without delay. The visual inspection also includes checking the screw connections on load-
bearing parts of the speaker and accessory.
4. Assembly and use instructions
4.1. Overview of assemblies
Description
Slider 30 x 5 x 90mm
Threaded pin, M6 x 8mm socket bolt, A2, DIN 916
Bracket (loudspeaker)
Screw, allen screw M6 x 10mm, A2, DIN 7984
Bracket (wall)
Axle element
Hexagon nut, M6, DIN 985
Hex bold, M6 x 35mm, DIN 933
Half bolt with allen, M8 x 16mm 10.9 vz, ISO 7380
Washer, M8
Cap
A
E
© Pan Acoustics GmbH
B
C
F
G
D
H
V 1.0
Drawing
A
B
C
D
E
F
G
H
I
J
K
Page 4 of 7
TWM III
Advertisement
