Safety When Working With Electricity; General Observations - Patton FiberPlex 1004E User Manual

FiberPlex FP1004E User Manual

Safety when working with electricity

The FP1004E contains no user serviceable parts, and is not be opened by the user. The
equipment shall be returned to Patton Electronics for repairs or repaired by qualified ser-
vice personnel.
WARNING
Mains Voltage: Line voltages are present in the power supply when the power cord is
connected. The mains outlet used to power the FP1004E shall be within 10 feet (3
meters) of the device, be easily accessible, and protected by a circuit breaker.
WARNING
For units with an external power adapter, the adapter shall be a listed Limited Power
Source. Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
WARNING
Hazardous network voltages are present in WAN ports regardless of whether power to
the FP1004E is ON or OFF. To avoid electric shock, use caution when near WAN ports.
When detaching the cables, detach the end away from the FP1004E first.
WARNING
Do not work on the system or connect or disconnect cables during periods of lightning
activity. Unplug this apparatus during lightning storms or when unused for long periods
of time.
WARNING
To reduce the risk of fire or electric shock, Protect the unit from moisture, vapors, and
aggressive liquids. Do not expose this apparatus to rain or moisture. Do not use this
apparatus near water. The apparatus shall not be exposed to dripping or splashing. No
WARNING
objects filled with liquids, such as vases, shall be placed on the apparatus.

General observations

Avoid exposing the unit to direct sunlight and other heat sources. Do not install near any
heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
CAUTION
Place the unit on a flat surface and ensure free air circulation. Do not stack multiple
FP1004E devices directly on top of one another, and do not place items on top of the
device. If you will be installing equipment above the FP1004E device, leave at least 2
CAUTION
inches (5 cm) of clearance between the devices.
Furthermore, leave at least 2 inches (5 cm) to the left, right, front, and rear of the
FP1004E for proper ventilation.
10