Special Case: Installation In Steps - Centrosolar S-Class Integration Deluxe Series Installation Manual

Installation guide
6 Special case: Installation in steps
If the modules must be installed in steps (due to interruptions such as windows, chimneys, roof geometries such as
hipped roofs or roof valleys, for example) special inner corners are available as roofing sheets.
a
120 mm
a
b
50 mm
b
Figure a1
a - Roofing sheet inner corner "left"
b - Roofing sheet inner corner "right"
Figure a2
Trimming the roofing frame "top" to a distance
of 50 mm from the module (see drawing) and
fastening using self-tapping screws and metal
retainers.
Apply an adhesive bead of MS polymer adhe-
sive HB 45 at a distance of 120 mm form the
module frame to the roofing frame "top" as
shown in the figure.
Figure a3
Install the inner corner "left" (b) as shown in fig-
ures 25 and 26, then press it on from the side,
place it on the roofing frame "top" and fasten it
using metal retainers.
a - Roofing sheet "top"
b - Roofing sheet "left"
27