Daikin FTKJ09NV1SW Service Manual page 29

Si041401EB
Step
4 Remove the screw, and
then the fan motor.
5 Remove the fan rotor.
6 Remove the bearing.
Removal Procedure
Procedure
Fan rotor
Fan motor
Fan rotor
Bearing
Fan Rotor / Fan Motor
Points
When reassembling the fan
motor and the fan rotor,
provide as much as 5 mm
(0.2 inch) of play between
the side face of the rotor and
the bottom frame.
(R12158)
Side face of rotor
5 mm (0.2 inch)
(R3917)
(1) Insert the fan motor allowing
for approx. 5 mm (0.2 inch)
of play.
(2) Tighten the fan rotor screw
until it stops. Then give the
screw one more turn.
(3) If the fan rotor rotates
appropriately, tighten the
(R20045)
screw completely.
(4) If not, repeat the procedure
from (1).
(R20046)
Side face of
bottom frame
(R18879)
(R9582)
27