Vector START-IT MAXX VW022APC Owner's Manual & Warranty page 6

1
3
5
6
4
8
16
FIGURE 1A (FRONT VIEW)
1. Reverse connection indicator
2. Good connection indicator
3. 12 volt DC accessory socket with 20 amp overload protection
4. Battery level pushbutton
5. LED charging/battery level indicators
6. Heavy-Duty welding quality jumper cables
7. Heavy-duty copper clamps
8. Exclusive quick-release clamp holsters
9. 110/120 volt UL approved AC/DC charging adapter
10.12 volt DC/DC charging adapter
11. Built-in CCFL emergency worklight
12. Light ON/OFF switch
13. AC recharge adapter barrel connector receptacle
14. 260 PSI compressor air hose and tire chuck
15. Analog pressure gauge
16. Compressor power switch
17. Inflation adapters included (not shown)
ADDITIONAL FEATURES:
• Includes non-spillable, maintenance-free, heavy-duty, new high energy density
19 amp hour, sealed battery
• Sturdy and unique compact design provides up to 35 hours of completely portable
12 volt DC power
• Safe to use, transport, and store. Includes an audible polarity alarm
• Requires no maintenance (other than recharging) for optimum operation
• Automatic taper charge for AC recharge
• Audible alarm for reverse polarity
• Molded high-impact case is tough and durable
• Built-in emergency worklight with krypton bulb for roadside repairs and use in
remote locations without utility power
CAUTION:
Use only adapters supplied with this unit. Never insert any other adapters into the
charging or power receptacles on this unit.
2
3
12
FIGURE 1B (REAR VIEW)
9
13
7
15
11
10
14
6