Source Selection - Tele System SMART24 SLIM12V Manual

If you opt for automatic scanning of digital TV, the TV will propose that you upload a list of Italian satellite
default channels with a typical arrangement of the TivùSat platform channels.
NOTE
•
The viewing of the encrypted TivùSat channels requires the use of a dedicated conditional access
module (CAM) and card (Smart-card), to be purchased separately.
•
Due to frequent satellite channel updates, the default satellite channel list may contain obsolete
channels and may not coincide exactly with the TivùSat channel list.
Once the selected frequencies have been scanned, the TV will create the channel list with the defined
arrangement (e.g. the LCN one, corresponding to the numbering requested by the terrestrial channel
issuers).
If you want to proceed with the scanning of different input/antenna channels, proceed as described above
choosing the corresponding type of antenna desired (different from the previous one).
The different available channel lists will then be available only if the TV is in the correct TV section
(terrestrial/cable/satellite). In particular, to switch from viewing a terrestrial channel to a satellite channel,
press the MENU button, enter the Channel menu and set Digital SAT (satellite) as Antenna Type. Obviously
to return to the terrestrial channel list, set Digital terrestrial as Antenna Type.
The TV will create a channel list with the defined ordering (e.g. the LCN one, corresponding to the
numbering requested by the terrestrial channel broadcasters) once TV has scanned the frequencies.
If you want to scan channels from a different input/antenna, then proceed as just described above by
selecting the corresponding Antenna type (a different one from the previous).
The various available channels list will then be accessible only if the TV is in the correct TV section
(terrestrial/cable/ satellite). In particular, to switch from viewing a terrestrial channel to a satellite
channel, press the MENU button, enter the Channel menu, and set the Antenna Type to Digital SAT
(satellite). If you want to return to the terrestrial channel list, set the Antenna Type back to Digital
terrestrial.

11.2 Source selection

If the television is in Smart/TV mode (HOME menu), you can select the TV's operating mode/input source
in the Source section (the next to last entry in the Home menu). Otherwise, in all other modes, use the
SOURCE button or follow the path MENU> Input. Then, choose between:
1. TV: to activate the digital TV mode (terrestrial/cable/satellite) and therefore allow reception of the
respective programs.
2. AV : to activate the RCA analog audio-video input.
(1)
3. YPbPr (1) : to activate the YPbPr component video input.
4. SCART : to activate the SCART analog audio-video input.
(2)
5. VGA (2) : to activate PC mode, from VGA video input and AUDIO IN PC.
6. HDMI 1/HDMI 2/HDMI 3
NOTE
(1) Cable-adapter required not included in the supplied accessories.
Audio-video connection cable not included among the supplied accessories.
(2)
NOTE
SOURCE list may change based on the TV model (please refer to Technical specifications)
: to activate the corresponding HDMI 1/2/3 digital audio-video input.
(2)
SMART TV - ENGLISH
5