Advertisement
WIRELESS LAPEL MICROPHONES
Portable diversity tuner
Portable diversity tuner
(URX-P1)
(URX-P1)
1 Antennas a/b
1 Antennas a/b
The angle of the antennas can be
The angle of the antennas can be
1 antenna
adjusted manually.
adjusted manually.
2 lapel mic input connector
3 power indicator
2 MONITOR connector (3.5-mm
2 MONITOR connector (3.5-mm
diameter stereo mini jack)
diameter stereo mini jack)
4 display section
To monitor the tuner output, connect
To monitor the tuner output, connect
5
+ (+ selection) / – (– selection/ reset) buttons
the headphones to this connector.
the headphones to this connector.
Press these buttons to set the transmission
channel, frequency, or attenuation level of the
3 RF (radio frequency) indicator
3 RF (radio frequency) indicator
input signal. The "–" button resets the
The color indicates the strength of the
The color indicates the strength of the
accumulated battery use time to "00:00".
RF input signal.
RF input signal.
6 battery compartment
On in green: RF input is 15 dBµ*
On in green: RF input is 15 dBµ*
7 SET button - press to change and
or more.
or more.
enter display parameters
Off: RF input is less than 15 dBµ*.
Off: RF input is less than 15 dBµ*.
8 power switch
4 Display section
4 Display section
9 audio output connector
Parts Identification
A RF (radio frequency) indications
The number of dots indicates the RF
input level.
B AF (audio frequency) indication
Appears whenever the output audio
signal is stronger than the reference
level.
C BATT (battery) indication
Shows the battery condition.
For details, see "Power Supply" on
page 30.
D CH (channel) indication
Shows the reception channel. Each
time you press the SET button, the
channel indication changes as follows.
For details, see "Settings" on page 38.
Reception
channel
Reception
frequency
Accumulated
battery use
time
The channel/frequency indications for
U66 model are shown.
26
25
25
C
A B
RF
BATT
AF
CH
D
The D channel indication for
U66 model is shown.
5 + (+ selection) / –
reset) buttons
Press these buttons to
channel and frequenc
button resets the accu
use time to "00:00". T
also be used to adjust
level.
6 Battery compartm
Accommodates two L
alkaline batteries.
For details on how to
batteries, see "Power
page 30.
7 SET button
Press to change displa
For details, see "Setti
38.
8 POWER switch
Turns the power of th
OFF.
9 OUTPUT (audio
connector (3.5-mm d
mini jack)
Connect one end of th
BMP conversion cabl
mini plug-BMP conve
and the other end to th
input on a camcorder,
amplifier. If the micro
connector on the devi
Press
the
the tuner is a stereo m
SET
the straight (BMP) plu
button.
and the L-shaped (ste
the microphone input
device.
Advertisement
