Table of Contents
Advertisement
Before first Use
Before first use, wash the frypan base and lid in warm soapy water. Rinse and dry thoroughly.
•
CAUTION: Do not immerse the power cord, plug or temperature control probe in water
or any other liquid. (See "Care and Maintenance")
Condition your frypan by wiping the interior of the frypan base lightly with a paper towel
•
and cooking oil. This will help prolong the life of the frypan and the non-stick coating.
Using YoUr frYpan
Ensure that the temperature control probe socket on the frypan base is completely dry.
•
Insert the temperature control probe in the probe socket on the frypan base.
•
NOTE: This frypan must only be used with the temperature control probe provided. Do not
use any other probe or connector.
Plug the power cord into a wall power outlet and switch the power on.
•
Set the temperature dial to the required temperature.
•
The red heating light will illuminate until the frypan reaches the set temperature.
•
Once the temperature has been reached, the red light will cycle on and off during cooking
•
to maintain temperature.
When finished cooking, turn off the power at the wall power outlet.
•
NOTE: The frypan will continue to heat while power is connected.
QUick release temperatUre proBe
The temperature control probe is equipped with a quick release lever. To remove the temperature
•
control probe from the frypan base, press in the quick release lever located on the side of the
probe (see figure A.) and withdraw the probe from the temperature control probe socket.
Figure A.
temperatUre gUidelines
1-3
Low
4-5
Medium
Figure A.
6-7
High
Advertisement
Table of Contents
