Conference - VBrick Systems ENTERPRISE MEDIA SYSTEM V5.0 User Manual

Conference

Use these steps to create a video conference between two encoders/decoder pairs at different
locations. This means that at the scheduled date and time a video conference will
automatically be launched using two specified VBricks—one at each end.
Note A video conference requires a matching pair of MPEG-2/4 encoders/decoders at each
end. You cannot use Windows Media or H.264 appliances for conferencing.
To schedule a video conference:
1. Select a schedule name, dates, and (optionally) recurrence pattern (see Scheduling an
Event).
2. For
Schedule Type
3. Select
VBrick 1
VBrick 1
Private
Public
Note
Advanced Settings
configuration parameters. It is unlikely you will ever need to change these settings. In
all cases you can safely ignore the
the VEMS Portal Server. See the VEMS Portal Server Admin Guide for details.
38
, select and click

Conference

, specify or
Private Public
VBrick at one end of conference. For MPEG-4 RTSP conferencing,
the RTSP ports must be set to 554 (the default) on each VBrick. In
IWS, go to Configuration > System > Security > RTSP Server Port.
Limited to the specified participants. Configure for Unicast using the
Advanced Settings.
Available to any participants. Configure for Multicast using the
Advanced Settings.
are available to configure encoders and decoders with exceptional
Advanced Settings
.
Next
and click .
Next
and use the defaults provided by
© 2009 VBrick Systems, Inc.