VBrick Systems ENTERPRISE MEDIA SYSTEM V5.0 User Manual page 37

Schedule time
Recurrence pattern
Range of recurrence Describe the start and end of the range. End can be none, number of
5. Select a
Schedule Type
Each schedule type has a different wizard as explained on the following pages but
basically, you select the source and destination targets (for live and stored broadcasts),
the VBricks (for a video conference), the live program you will record, or the script or
control device you will manipulate. Go to the appropriate section below depending on
the
Schedule Type
Schedule Type
6. Configure
Advanced Settings
7. Click to page through each wizard. Click
Next
8. Verify the information and click
below). If you need to make changes, click
When done, the named schedule is added to the calendar page of scheduled events. Any
scheduled links use color-coded text as shown in Table 6.
VEMS Portal Server User Guide
Set start, end, and duration. Duration cannot exceed 24 hours.
Use the radio buttons and check boxes to set a Daily, Weekly, or
Monthly recurrence pattern. A recurring event is shown on the
scheduler with a special icon.
occurrences, or a specific date.
.
you select.
• Live Broadcast – Broadcast a live channel.
• Stored Broadcast – Broadcast a stored video.
• Conference – Set up a video conference.
• Record – Schedule and save a recording.
• Script – Schedule a script to run on a device.
• Control Device – Schedule and manipulate an external device.
for VBricks as necessary (see Advanced Settings below).
Create Schedule
when done.
Finish
when prompted (see Create Schedule
and adjust the schedule as necessary.
Modify
Scheduling
31