VBrick Systems ENTERPRISE MEDIA SYSTEM V5.0 User Manual page 40

3. In
Select Video Source
VBrick
Program Name
Enter Manually
To use a
VBrick
1. Select
VBrick
2. Select one VBrick by
specified).
3. Select one or more destination
.
Finish
4. Verify the information and click
calendar.
Note If you create a "server" schedule whereby a unicast stream is pulled from a WM server
(this means the
cannot be launched from the Schedule page and will not display a TV icon. To launch
this stream, you must know the IP address of the VBrick resource, or an administrator
can add a URL for a live stream as explained in the Portal Server Admin Guide.
To use a
Program Name
1. Select
Program Name
2. Select one
Program Name
3. Select the destination
4. Verify the information and click
calendar.
34
, choose one of the following and click
Select a live stream by VBrick name.
Select a live stream by Program Name from all available.
Enter an appliance source.
as the :
Video Source
as the .
Video Source
and click
Hostname
VBrick(s)
Create Schedule
is
Destination Server
as the
Video Source
as the
Video Source
and click
Next
or
VBrick(s) IPR(s)
Create Schedule
Next
(or if no destinations are to be
Next Finish
or that will receive the video and click
IPR(s)
to add the new schedule to the
rather than ), the scheduled event
Multicast
:
.
.
that will receive the video and click
to add the new schedule to the
.
.
Finish
© 2009 VBrick Systems, Inc.