Inventory - Grizzly G0897 Owner's Manual

Inventory

The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Box 1 (Figures 5–7)
A. Metal Belt Grinder ...................................... 1
B. Base ........................................................... 1
C. Pedestal...................................................... 1
D. Work Rest ................................................... 1
E. Spark Trap .................................................. 1
F.
Eye Shield .................................................. 1
G. Hex Wrenches 4mm, 5mm ....................1 Ea
Model G0897 (Mfd. Since 6/19)
A
Figure 5. Inventory—belt grinder.
B
Qty
Figure 6. Inventory—base components.
D
Figure 7. Inventory—small parts.
C
F
E
G
-13-