Quick Start Guide - C. Crane CCRadio-EP PRO Instruction Manual

Quick Start Guide

1. Plug in the supplied AC Power Adapter or 4 "D" batteries (see
"Powering Your Radio" on Page 10).
2. Turn the radio on by pressing the red POWER button on the top of
the radio (see "Radio Controls and Functions on Page 8 for location).
3. Adjust the VOLUME knob to your preferred listening level.
4. Select the BAND switch to either AM, FM or FM Stereo.
5. For best FM reception, lift, extend and rotate the FM WHIP ANTENNA.
6. Adjust the TUNING knob until your desired radio station frequency is
indicated on the dial or until your station has best reception.
7. For best AM reception please tune slowly to find your AM station so
you can hear the audio. If you tune too fast it may appear to skip over
your station. Typically, you will find a weak station image right before
the station you want. If you tune a little further, you will find the main
signal of the station comes in much clearer.
Finally, rotate the entire
radio until station reception
is best. Adjust the
WIDE-NARROW knob for your
sound preference along with
the Bass and Treble.
Page 7
You can often enhance AM
reception by tuning the small
"AM FINE TUNING" knob (on
the right side of the radio) by
"ear", for maximum clarity.
The radio comes with this
knob locked in position, so you
must remove the sticker first.
Main signal AM station
Weak station
image
CCRadio-EP PRO