Table of Contents
Advertisement
4.2.2
Connection via the CON550 Module
Presetting Rack_ID
Setting TCP/IP addresses
1070 072 262-101 (01.09) GB
The Rack_ID (rack address) has to be set prior to
commissioning. The Rack_ID is the identification
number of a rack [01 to 99]. Each Rack_ID can only
be assigned once in a controller system. In the
CON550 module, it is set via rotary switches on the
frontside.
To establish a communication, the IP addresses of the programming device/
the network PC and the IP address of the ZS550 backside have to be located
in the same subnetwork.
.
The IP addresses are determined by the network administrator.
Commissioning Step by Step
IP addresses
4–7
Advertisement
Table of Contents
