Table of Contents
Advertisement
Project Configurator
3–28
3.4
Project Protection
3.4.1
Changing of System Password
Initial creation
Change or delete
The system password serves to protect a configuration file.
In case of a protected file, the following may not be changed:
D The current configuration file
D The contents of the system modules
Create password via menu PROJECT PROTECTION
L
TEM PASSWORD.
Enter password.
L
Confirm password.
L
Change or delete password via menu PROJECT PROTECTION
L
CHANGE SYSTEM PASSWORD.
Enter old password.
L
Enter new password or leave
L
field empty to cancel system
protection.
.
After entering, changing or deleting a password, this will initially be ac-
cepted for the current configuration file only.
To update the system protection in the entire system, it is necessary to
perform the loading procedure. It is necessary to select the loading op-
tion "Overall system" to make sure that the password is updated in all
system modules. Only then is access protection ensured for the over-
all system.
CHANGE SYS-
"
"
1070 072 262-101 (01.09) GB
Advertisement
Table of Contents
