Table of Contents
Advertisement
PRODUCT USAGE
NOTE: To avoid damage to the Fruit and Vegetable Strainer attachment and/or the
Stand Mixer, Labruscan or slip-skin type grapes such as Concord, Catawba, and Ontario
grapes should not be processed in the Fruit and Vegetable Strainer. Only Ninifera family
grapes such as Tokay and Thompson Seedless may be processed.
ASSEMBLING THE ATTACHMENT
Before first use, clean all parts and accessories (see "Care and Cleaning" section).
1
Secure the smaller spring end of the Shaft
Assembly into the Large Grind Screw.
Insert the Long Grind Screw into the Main
Housing.
3
Notch
Tab
Insert the Collar over the Strainer Cone
and rotate clockwise to secure.
Slide the Strainer Shield over the cone and
latch on the top of ring.
Collar
2
Notch
Place the Strainer Cone over the Long
Grind Screw matching the notch of the
Strainer Cone with the tab on the bottom
of the Main Housing.
4
Place Splash Lid on the Strainer Shield.
Tab
5
Advertisement
Table of Contents
