Table of Contents
Advertisement
PRODUCT
IDENTIFICATION
Cast Iron
Stove Body
Log Set
Rear
Cover
ON/OFF
Switch
(Other Side)
Pilot
Blower with
Assy
Adjustment
Knob (Optional
Installation)
Figure 1 - Vanguard B-Vent Burner System Shown Installed in Approved Vanguard
Cast Iron Stove Body Models SCIVFC Series and PSCIVFC Series Only
106828
Piezo Ignitor
Vent
Opening
Grate Assembly
OWNER'S MANUAL
Control Valve
Cast Iron
Stove Body
Burner
Glass Door
Assy
Lava Rock
Glowing Embers
For more information, visit www.desatech.com
3
LOCAL CODES
Install and use stove and burner system with
care. Follow all local codes. In the absence
to local codes, use the current National Fuel
Gas Code ANS Z223.1, also known as
NFPA 54* (USA) or the current CAN/CGA-
B149[.1 or .2] Installation Codes (Canada).
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02269
PRODUCT
FEATURES
OPERATION
This B-vent cast iron stove with burner
system is clean burning and vents vertically.
Heat is generated by both realistic flames
and glowing embers. When used without
the blower accessory, the stove with burner
system requires no electricity making it
ideal for emergency backup heat.
PIEZO IGNITOR
This burner system has a piezo ignitor. This
system requires no matches, batteries, or
other sources to light burner system.
Advertisement
Table of Contents
