Table of Contents
Advertisement
SPECIFICATIONS
Gas Type
Ignition
Manifold Pressure
Minimum Inlet Supply Pressure
Thermal Efficiency
Dimension, Inches/mm (HxWxD)
Stove and Burner System*
Carton (Insert Only)
Weight, lbs/kg
Burner System
Shipping
* When installed in Amity cast iron stove body (SCIVFC Series and PSCIVFC Series).
ACCESSORIES
Purchase these stove and burner system
accessories from your local dealer. If they
can not supply these accessories, call DESA
International's Sales Department at 1-800-
432-2382. for information. You can also
write to the address listed on the back page
of this manual.
THERMOSTATICALLY-
CONTROLLED BLOWER KIT
DA3610TA
Provides better heat distribution. Blower
turns off and on automatically, as needed.
Complete installation and operation instruc-
tions included in this manual.
106828
SBVBN(C)
21,000-30,000 Btu/h
Natural
Piezo
3.5" w.c.
4.5" w.c.
70%
1
27" x 26
/
" x 20"
4
685.8 x 660.4 x 635mm
23" x 33" x 23"
584.2 x 838.2 x 584.2mm
70 lbs/31.8 kg
75 lbs/34 kg
RECEIVER AND HAND-HELD
REMOTE CONTROL KIT
GHRC
For all models. Allows the heater to be
turned on and off conveniently.
RECEIVER AND HAND-HELD
THERMOSTAT REMOTE
CONTROL KIT - GHRCTA
Allows the burner system to be operated in
a manually or thermostatically controlled
mode. You can adjust your heat settings and
turn the heater on or off without leaving the
comfort of your easy chair.
OWNER'S MANUAL
SBVBP(C)
20,000-28,000 Btu/h
Propane/LP
Piezo
10.0" w.c.
11.0" w.c.
70%
1
27" x 26
/
" x 20"
4
685.8 x 660.4 x 635mm
23" x 33" x 23"
584.2 x 838.2 x 584.2mm
70 lbs/31.8 kg
75 lbs/34 kg
WALL MOUNTED
THERMOSTAT CONTROL
KIT GWMT1 (Not Shown)
Allows easy wall access to the operation of
your burner system. This will allow you
thermostatic control with the convenience
of a wall switch.
WALL MOUNTED ON/OFF
SWITCH - GWMS2
(Not Shown)
Allows burner system to be turned on and
off with a wall switch.
For more information, visit www.desatech.com
27
Advertisement
Table of Contents
