D-Link DCH-S161 User Manual page 15

Section 2 - Installation
Step 3:
After logging in, tap the Menu icon in the top-left corner, select Add New Device and follow
the on-screen instructions to connect to your sensor. Wi-Fi needs to be enabled on your phone.
Step 4:
When you are asked to scan a QR code, select Yes or No.
If you selected Yes:
Scan the QR code on the back of the sensor, then press Next.
If you selected No:
Select the DCH-S161 sensor from the list, then press Next.
Select Next and continue to follow the on-screen instructions.
Final Step:
Congratulations, your Wi-Fi Water Sensor is now ready to use!
Be sure to enable the Auto-Upgrade function for the latest firmware updates to keep your
product secure and up to date with the latest features.
Note: If you experience issues registering this sensor with your mydlink account, or if you
purchased an open box or resold unit, perform a hard reset by pressing the recessed reset
button on the top briefly while the device is powered on. You will see the LED on the action
button flash red once to confirm the reset.
D-Link DCH-S161 User Manual 12