Computer To Ut-300R2 Connection; Hub Or Switch To Ut-300R2 Connection - UTStarcom UT-300R2 User Manual

Computer to UT-300R2 Connection

Figure 4 Computer to UT-300R2 Connection
You can connect the UT-300R2 directly to a 10/100BASE-TX
Ethernet adapter card (NIC) installed on a PC using the
Ethernet cable provided as shown in this diagram.

Hub or Switch to UT-300R2 Connection

Connect the UT-300R2 to an uplink port on an Ethernet hub or
switch with a straight-through cable as shown in the diagram
below:
Chapter 2 Installation Planning 9