Table of Contents
Advertisement
SETTINGS: HARDWARE
• In the Device List, the "other" device which has estab-
lished a connection must be selected in the "Other
Devices" group (to see which devices are currently select-
ed, set the menu in the Selected column to "Manual").
When this box is not checked, QuickLink Mobile will not
respond to connections established by "Other Devices."
■ SETTINGS: CONNECTION TIMEOUT
The settings on the Connection Timeout tab allow you to
specify if and when QuickLink Mobile will automatically shut
down a connection.
CONFIGURING DURATION TIMEOUTS
A duration timeout is simply a maximum time allowed for
any connection. So, if you specify a duration timeout of 30
minutes, any connection that lasts longer than 30 minutes
will be shut down.
To configure a duration timeout, check the Enable Duration
Timeout box. Then, specify the number of minutes after
which the timeout should occur.
CONFIGURING INACTIVITY TIMEOUTS
Configuring an inactivity timeout instructs QuickLink Mobile
to disconnect if there has been little or no data exchanged
on a connection for a specified number of minutes.
To configure an inactivity timeout, check the Enable
Inactivity Timeout box. Then, specify the number of minutes
of inactivity that will trigger the timeout.
QLM SETTINGS
45
Advertisement
Table of Contents
