Table of Contents
Advertisement
Figure 14 Configure DHCP server settings for the LAN
The three options for DHCP service are as follows:
1
You may use the UT-300R2 as a DHCP server for your
LAN.
2
You can disable DHCP service and manually configure IP
settings for all workstations.
You will use a DHCP service provided by your ISP, in which
case DHCP should be disabled on the UT-300R2.
DHCP Server Settings for the LAN
The default setting of UT-300R2 's DHCP server is disabled.
While you click to select the Enabled radio button under the
DHCP Server option, the device will become the default
gateway for DHCP clients that connected to it. When the UT-
300R2 is used for DHCP it becomes the default gateway for
DHCP client connected to it. Keep in mind that if you change
Chapter 4 Web-based Management
33
Advertisement
Table of Contents
