MGG DTC-WP Manual

Waterproof and Re-chargeable Dog Training Collar
1.

Antenna

2.

LED light

3.

Red LED light (launch or charging)

4.

LCD display

1-100 level
Static shock mode
Vibration mode
Beep mode
Light mode
Channel 1
Channel 2
Low battery
5. Up/down button
6. LED light button
7. Channel button
8. Launch button
9. Mode button
10. Charging jack
◘

Features

1. 100 levels of vibration.
2. 100 levels of static correction (optional).
3. The levels can be altered by use of up & down button.
4. A tone button activates a tone on the Collar Receiver.
5. The system can be used for 1 or 2 receivers.

POWER SAVING

6. The Collar Receiver will TURN OFF if it is unused for 4 minutes.
7. Any movement will activate the Collar Receiver into STANDBY MODE.
8. The Transmitter will go into STANDBY MODE if there is no operation after 20 seconds and
turn off after 2 minutes.
◘

To Prepare the Remote Hand-held Transmitter

Charge the Remote Hand-held Transmitter
1. Connect the charger connector to the charging jack.
2. Plug the charger into a power outlet
DTC-WP
1