Related Manuals for MGG DTC Pro-Trainer
Summary of Contents for MGG DTC Pro-Trainer
- Page 1 DTC Pro-Trainer Remote Training and Beeper Collar System Instruction Manual Pease read the entire guide before use...
- Page 2 Brief introduction for the Remote Transmitter Mode Button: hold over 3 seconds to turn on/off the Remote Transmitter. Press the button to choose the different modes. There are 5 modes as follows: Antenna Charging Jack Vibration mode Static mode Indicator Light 1-9 Intensity Level Channel 1 or 2 Channel (Collar) selector...
- Page 3 On/Off Button Indicator Light Beeper Speaker Indicator Light Training Collar Remote Beeper Charging Jack Socket Contact Points On/Off Button Charging Jack Socket Brief introduction for Remote Beeper Waterproof Remote Beeper: Beeps with a tone and frequency set by the user. On/Off button: Turns the Remote Beeper on/off.
- Page 4 Fitting the Charging Cable To the Collars How to set the Training Collar to work with a Remote Transmitter Press the On/Off button to turn on the Training Collar. The Green indicator light flashes twice per second. Now the Training Collar is in Standby status. Turn the Training Collar off and the Green LED light goes out.
- Page 5 Turn on The training collar and the transmitter. Select the channel which you encoded the collar with (1 or 2) Press the Mode Button to choose V or S mode as you require For V Mode – vibration mode – there are 9 intensity levels. Please use Up/Down button to adjust them.
- Page 6 The Green Remote Beeper is worn on the collar on the topside of your dog’s neck and the Orange Training Collar on the underside. It is at the correct tightness when you can slip one finger between the collar and the dog. Website: mggproducts.co.nz Email: info@MGG.co.nz © Machines Gadgets and Gizmows Ltd 2013...
Need help?
Do you have a question about the DTC Pro-Trainer and is the answer not in the manual?
Questions and answers